Ford 2002 Bantam Workshop Manual page 667

303-01D-163
INSTALLATION (CONTINUED)
E5915 EN
Engine — 1.8L Diesel - Endura DE
62. Attach the upper coolant hose.
63. Install the air intake pipe.
64. NOTE: When tightening the nuts, hold with
65. Bleed the hydraulic clutch system. For
1. Attach the resonator hose (clamp).
2. Insert it in the air cleaner housing (push
fit).
3. Clip it in place.
4. Attach it to the intake manifold (clamp).
an Allen key to prevent from turning.
Tighten the nut on both suspension struts.
additional information,
refer to Section 308-01.
• If necessary, fill up the brake fluid
reservoir with Ford brake fluid (SAM-
6C9103-A).
303-01D-163
09/2001 2002 Bantam