Throttle Position (Tp) Sensor — Vehicles With 1.6L / 1.3L Engines (23 325 0) - Ford 2002 Bantam Workshop Manual

303-14-242
REMOVAL AND INSTALLATION
Throttle Position (TP) Sensor — Vehicles with 1.6L / 1.3L Engines (23 325 0)
E6694 EN
Electronic Engine Controls
Removal
1. Remove the throttle body. For additional
information,
2. Remove the throttle position (TP) sensor.
3. Remove and discard the O-ring seal.
Installation
1. NOTE: Install a new TP sensor O-ring seal.
To install, reverse the removal procedure.
303-14-242
refer to Section 303-04B.
07/2001 2002 Bantam