Electronic Engine Controls - Ford 2002 Bantam Workshop Manual

303-14D-226
DIAGNOSIS AND TESTING

Electronic Engine Controls

Inspection and Verification
1. Verify the customer concern by operating the
system.
2. Visually inspect for obvious signs of
mechanical or electrical damage.
Visual Inspection Chart
Mechanical
• Fuel leak(s)
• Vacuum line(s)
• Sensor(s)
• Clutch pedal position
switch
E7855 EN
Electronic Engine Controls — Diesel Engine
Electrical
• Wiring harness
• Loose or corroded
electrical connector(s)
• Powertrain control
module
• Sensor(s)
• Clutch pedal position
switch
3. If an obvious cause for an observed or
reported concern is found, correct the cause
(if possible) before proceeding to the next
step.
4. If the concern is not visually evident, verify
the symptom and refer to WDS to diagnose
the system.
303-14D-226
09/2001 2002 Bantam