Valve Cover (21 140 0) - Ford 2002 Bantam Workshop Manual

303-01B-40
IN-VEHICLE REPAIR

Valve Cover (21 140 0)

E6633 EN
Engine — 1.6L / 1.3L RoCam
Removal
1. Disconnect the battery ground cable.
2. Disconnect the electrical connectors.
3.
4. Disconnect the hoses.
1. Disconnect the power control module
(PCM).
2. Disconnect the camshaft position (CMP)
sensor.
3. Disconnect the electronic ignition (EI)
coil.
CAUTION: Do not pull the cable when
removing spark plug connector. If
necessary, remove the ignition
cables from the ignition coil to avoid
kinking the cables. Turn the spark
plug connector slightly before
removing to loosen the seal.
CAUTION: Pull off the spark plug
connectors in line with the spark plugs
(for bent spark plug connectors use
Special Tool 303-622).
Disconnect the spark plug wires from the
spark plugs.
1. EVAP solenoid valve vacuum hose
2. Positive crankcase ventilation hose
3. Crankcase breather hose
07/2001 2002 Bantam
303-01B-40