Ford 2002 Bantam Workshop Manual page 536

303-01D-32
IN-VEHICLE REPAIR (CONTINUED)
E5882 EN
Engine — 1.8L Diesel - Endura DE
15. NOTE: Clean the cylinder head cover gasket
NOTE: Before fitting the gasket, coat it lightly
with engine oil.
16. NOTE: Coat the running surface and the
17. Fit the flange of the camshaft timing pulley.
18. Fit the camshaft timing pulley.
and check it for damage. Only renew it if it is
damaged. The gasket can be reused several
times if it is in good condition.
Fit the cylinder head cover.
1. Screw in the bolts.
2. Attach the crankcase ventilation hoses.
sealing lip of the oil seal with engine oil. The
text on the oil seal faces outwards during
installation.
Fit the camshaft oil seal using the special
tool and an M8 bolt.
• Insert the Woodruff key.
• Draw on the flange with the bolt.
303-01D-32
09/2001 2002 Bantam