Cooling System Draining, Filling And Bleeding (24 122 0) - Ford 2002 Bantam Workshop Manual

303-03-168
GENERAL PROCEDURES

Cooling System Draining, Filling and Bleeding (24 122 0)

E2465 EN
Engine Cooling
Drain
1. WARNING: When releasing the system
pressure, cover the expansion tank
cap with a thick cloth to prevent the
possibility of coolant scalding.
Relieve the cooling system pressure.
• Unscrew the cap slowly.
2. Remove the cap.
3. Raise and support the vehicle. For
additional information,
4. Remove the radiator undershield.
5. Remove the drain plug.
• Drain the coolant into a suitable
container.
6. Refit the drain plug when all coolant has
drained.
7. Refit the radiator undershield.
8. Lower the vehicle.
303-03-168
refer to Section 100- 02.
07/2001 2002 Bantam