Ford 2002 Bantam Workshop Manual page 567

303-01D-63
IN-VEHICLE REPAIR (CONTINUED)
E5883 EN
Engine — 1.8L Diesel - Endura DE
4. Put the camshaft bearing shell upper halves
5. Apply sealer (SPM-4G-9112-F/G) to
6. Install the camshaft.
NOTE: The bearing caps must lie flat.
NOTE: Tightening sequence.
7. Fit the oil baffle.
in place and coat them with engine oil.
bearing cap no. 1 in the areas indicated.
• Locate camshaft bearing caps nos. 1, 3
and 5 in position.
• Screw on the nuts and tighten them.
303-01D-63
09/2001 2002 Bantam