Ford 2002 Bantam Workshop Manual page 744

303-03-143
REMOVAL AND INSTALLATION (CONTINUED)
Thermostat — Vehicles with 1.8L Endura DE Diesel Engine (24 454 0)
Special Tool(s)
Remover/Installer, cooling
hose clamp
24-003
E5887 EN
Engine Cooling
Removal
1. Drain the cooling system.
Refer to the procedure in this section.
2. Disconnect the coolant hose.
3. Remove the thermostat housing.
4. Remove the thermostat.
303-03-143
07/2001 2002 Bantam