G11: Front Hub And Stud Circle Run Out; G12: Wheel Balance - Ford 2002 Bantam Workshop Manual

204-00-18
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS

G11: FRONT HUB AND STUD CIRCLE RUN OUT

G12: WHEEL BALANCE

E1049 EN
Suspension — General Information
1 Remove the front wheel.
- Remove the front brake disc.
- Measure the stud circle run out (greater than
• Are the measurements correct?
1 Balance all the wheels. Road test the vehicle.
• Is a vibration felt?
DETAILS/RESULTS/ACTIONS
0.06 mm) and rotor pilot radial run out
(greater than 0.05 mm).
Yes
CHECK the front brake disc run out.
REFER to Section 206-00.
TEST the system for normal operation.
No
INSTALL a new hub.
REFER to Section 204-01.
TEST the system for normal operation.
Yes
REFER to Section 100-04.
No
Verify the customer concern.
204-00-18
06/2001 2002 Bantam