Ford 2002 Bantam Workshop Manual page 970

308-03-80
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES (CONTINUED)
E1165 EN
Manual Transaxle
5. Detach the 2nd gearwheel and
synchronizer assembly.
1. Retaining ring
2. Half rings
3. 2nd gearwheel
4. Inner synchronizer ring
5. Synchronizer cone
6. Outer synchronizer ring
6. NOTE: Detach the 1st gearwheel and
synchronizer assembly together.
Detach the 1st gearwheel and the reverse
gearwheel together with the synchronizer
clutch and synchronizer assembly.
1. Detach the snap-ring.
2. Take off the 1st/2nd gear synchronizer
clutch with the reverse gearwheel.
3. Outer synchronizer ring
4. Synchronizer cone
5. Inner synchronizer ring
6. Gearwheel - 1st gear
308-03-80
07/2001