Ford 2002 Bantam Workshop Manual page 644

303-01D-140
ASSEMBLY (CONTINUED)
E6005 EN
Engine — 1.8L Diesel - Endura DE
Engines with automatic timing belt tensioner
64. Preparations for tensioning the timing belts.
Engines with automatic timing belt tensioner
65. NOTE: Hold the camshaft timing belt pulley
Engines with automatic timing belt tensioner
66. NOTE: Position a screwdriver between the
Engines with automatic timing belt tensioner
67. NOTE: If necessary, turn the camshaft using
• Turn the crankshaft further in the normal
direction of rotation of the engine until the
slot in the injection pump timing belt pulley
is at 11 o'clock.
• Screw in the timing pin.
• Carefully turn the crankshaft in the
normal direction of rotation of the engine
until it comes up against the timing pin.
• Insert Special Tool 23-029.
steady.
Loosen the bolt of the camshaft timing belt
pulley and slacken the camshaft timing belt.
camshaft timing belt pulley and the timing belt
rear cover.
Release the camshaft timing belt pulley.
• Release the camshaft timing belt pulley
from its conical seat by tapping on it lightly
with a light metal drift.
• Slacken the bolt of the adjusting cam.
water pump pliers until the timing tool can be
inserted.
Insert the special tool in the camshaft.
303-01D-140
09/2001 2002 Bantam