Ford 2002 Bantam Workshop Manual page 655

303-01D-151
INSTALLATION (CONTINUED)
E5915 EN
Engine — 1.8L Diesel - Endura DE
6. Install the resonator.
7. Lower the engine and transmission
8. Unhook the workshop hoist and detach the
9. General Remarks.
10. Locate the engine and transmission
11. Slowly lower the vehicle and guide the
12. Attach the rear engine mounting.
NOTE: Do not tighten the nuts and bolts.
assembly onto the assembly table and
secure it with tensioning straps.
engine lifting bracket.
• Renew circlips and self-locking nuts.
• When installing coolant and ventilation
hoses, if necessary. For additional
information, refer to Section 303-03.
assembly in position under the vehicle.
engine and transmission assembly into the
engine compartment.
1. Bolts
2. Nuts
3. Fit the transmission breather.
303-01D-151
09/2001 2002 Bantam