Ford 2002 Bantam Workshop Manual page 473

303-01B-101
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES (CONTINUED)
E6644 EN
Engine — 1.6L / 1.3L RoCam
3. NOTE: The valve seals are fully pressed in by
valve spring pressure.
4. Using the special tools, install the valve
5. Remove the camshaft bearing caps and the
6. Install the hydraulic lash adjusters.
Using the special tool, install the valve
seals.
spring.
1. Compress the valve spring and the valve
spring retainer.
2. Insert the valve collets.
camshaft.
1. Remove the camshaft bearing caps.
2. Remove the camshaft.
303-01B-101
07/2001 2002 Bantam