Replacing The Power Supply; Figure 8-1 Removing The Power Supply - Sun Microsystems SPARCstation 5 Model 110 Service Manual

Power supply
Captive screws
(some models
have only one)
FIGURE 8-1
6. Disconnect the power supply connector from the system board.
See
FIGURE 8-1
7. Slide the power supply toward the chassis front to free it from the chassis mounts.
See
FIGURE 8-1
8. Lift the power supply out of the chassis and disconnect the DC power harness
(labeled P1) from the keyed connector on the rear of the power supply.
See
FIGURE 8-2
8.1.2

Replacing the Power Supply

1. Attach a wrist strap and secure it to the rear panel.
See
FIGURE 8-1
Power supply
connector
Removing the Power Supply
.
.
.
.
Power supply
rear view
DC power
harness (P1)
DC power
connector
Chapter 8 Major Subassemblies 8-3