Forth Diagnostics; Running The Forth Diagnostics; Test <Alias Name>, Test <Device Path - Sun Microsystems SPARCstation 5 Model 110 Service Manual

Table of Contents

A P P E N D I X

FORTH Diagnostics

This appendix explains FORTH Diagnostic tests. The following topics and tests are

described.

test <alias name>, test <device path>

test-all

watch-clock

watch-net, watch-aui, watch-tpe, and watch-net-all

probe-scsi, probe-scsi-all

module-info

test-memory

Returning to the Old-Style Sunmon Compatibility Mode Prompt

You have access to a number of additional tests in the boot PROM called FORTH

Diagnostics. To invoke these tests, you must enter the FORTH Monitor.

Caution – To run the FORTH Diagnostics, you must halt the system in an orderly

manner. When the operating system or any other standalone program has already

booted, do not press Stop-a to halt the system. Abruptly aborting program execution

may cause damage to data files.

D.1

Running the FORTH Diagnostics

1. Save all your work and quit all applications.

Consult your software documentation for instructions on ending a work session and

saving your files.

D-1

Table of Contents

Do you have a question about the SPARCstation 5 Model 110 and is the answer not in the manual?

Sparcstation 5