Post Error Messages - Sun Microsystems SPARCstation 5 Model 110 Service Manual

TABLE 3-2
Soft Interrupts OFF Test
Soft Interrupts ON Test
PROC0 User Timer Test
PROC0 Counter/Timer Test
DMA2 E_CSR Register Test
LANCE Address Port Tests
LANCE Data Port Tests
DMA2 D_CSR Register Test
DMA2 D_ADDR Register Test
DMA2 D_BCNT Register Test
DMA2 D_NADDR Register Test
ESP Registers Tests
DMA2 P_CSR Register Test
DMA2 P_ADDR Register Test
DMA2 P_BCNT Register Test
PPORT Registers Tests
NVRAM Access Test
TOD Registers Test
3.6

POST Error Messages

The POST error messages returned to the terminal are self-explanatory. For example,
if no DSIMM is installed in the system, the POST will tell you that no DSIMM is
installed and will indicate the slot number of the DSIMM slot. Use the error
messages returned by POST to troubleshoot the system.
3-8 SPARCstation 5 Model 110 Service Manual • November 1996
Full Diagnostic Mode Tests (Continued)