Troubleshooting; Common Errors - Avery Dennison Monarch Sierra Sport4 9493 Operator's Handbook Manual

T R O U B L E S H O O T I N G
This chapter lists some common problems and their solutions.
Problem
Printer does not
feed.
Printer does not
print.
Print has voids or
is too light.
Printer turns off
while printing
and/or the display
goes blank.
C o m m o n E r r o r s
The following is a list of common printer errors you may receive. If you receive a message not
listed here, see your System Administrator or call Service.
Error
025
Invalid Length
101
Invalid/Missing
409
Memory Full
410
Parity
411
Framing
413
Overrun
611
Error Loading
612
Invalid Data
Solution
Use a fully charged battery.
Close the printer completely.
Load the supply and ribbon correctly.
Run the printer diagnostic tests. Refer to the System Administrator's Guide for
more information.
Use a fully charged battery.
Close the printer completely.
Clean the printhead.
Run the printhead diagnostics tests. Refer to the System Administrator's Guide
for more information.
Use a fully charged battery.
Close the printer completely.
Load the supply and ribbon correctly.
Clean the printhead.
Run the printhead diagnostics tests. Refer to the System Administrator's Guide
for more information.
Use a fully charged battery.
Resend the format.
The maximum black to white print ratio for each label/tag is 30%. Check your
format for unnecessary, thick horizontal lines.
Description
String length is outside the range 0 to 2710.
The format referenced by batch is not in memory.
The printer memory is full. Delete unnecessary formats or graphics from
memory.
Parity mismatch. Check your parity settings at the printer and at the host.
Framing error (baud rate mismatch). Check your baud rate settings at the printer
and at the host.
Online receive queue is full. Check for a flow control problem.
Font, bar code, or density in the batch does not fit the format.
The data in this line of the batch is missing or does not match the format.
4

Troubleshooting 4-1