Operator Panel - OKIDATA Pacemark 3410 Service Handbook

3.2.04

Operator Panel

1. Remove the upper cover assembly (3.2.03)
2. Disconnect the operator panel cable (1) from CN10 (2) on the control board.
3. Remove the two mounting screws (3).
4. Detach the operator panel assembly by moving it upward, and then pulling toward
the front of the printer, detaching the four claws.
5. Release the ten claws.
6. Detach the operator panel (4) from the operator panel holder (5).
P/N 53553401 Panel: Operator (PM3410)
P/N 55061401 PCB: OPML Operation Panel
P/N 56628402 Cable: Op Panel (PM3410)
Maintenance
RSPL
RSPL
RSPL
3 - 12 Pacemark 3410 Service Handbook
B.2.04
B.2.04
B.2.04