Remove the Image Drum Protective Paper
1. Press the cover release buttons and lift the cover.
2. Lift out the image drum cartridge. Do not touch the drum's
green surface.
Only the OKIPAGE 10 and 12 Series Type 5 Image Drum will fit
in this unit (Part# 40433305)
OKIPAGE 10ex User's Guide
1
3. Remove the protective paper from the image drum.
4. Reinstall the image drum cartridge in the printer.
Removing Operator Panel Protective Film
Lift up the corner and peel the protective plastic film from the control
panel.
Setting Up Your Printer
3