1.6.17
Paper Tear Capabilities
Form Tear-Zero Tear
Metal Tear Bar
1.6.18
Print Method
Printhead Type
General Information
Impact, Dot Matrix
Staggered, 9 pin, stored energy printhead
0.36 mm diameter pins
Installed by Service Technician
The Printhead Gap Adjustment must be performed when the printhead is replaced.
Overheat Protection
When the printhead temperature reaches 115 degrees Celsius, the printer stops bi-directional
printing. Uni-directional printing begins.
If the temperature continues to rise (125° Celsius), printing stops.
Printing will resume when the printhead temperature drops below 115 degrees Celsius.
1.6.19
Print Modes
Near Letter Quality (NLQ)
Utility
High Speed Draft
1.6.20
Print Speeds
Pitch
10 cpi
12 cpi
15 cpi
17.1 cpi
20 cpi
Specifications
High Speed Draft
550 cps
550 cps
550 cps
550 cps
550 cps
cpi - Characters Per Inch
cps - Characters Per Second
Utility
Near Letter Quality
417 cps
417 cps
417 cps
417 cps
417 cps
1 - 8
Pacemark 3410 Service Handbook
104 cps
104 cps
104 cps
104 cps
104 cps