Head Cable Assembly - OKIDATA Pacemark 3410 Service Handbook

3.2.21

Head Cable Assembly

1. Detach the printhead (3.2.01)
2. Remove the ribbon cartridge bracket (3.2.19).
3. Loosen the two mounting screws (1), detach the tabs from the frame and remove the
cable holder (2). The tabs must be accessed from the bottom of the printer
mechanism.
4. Remove the mounting screw (3) and detach the connector clamp (4).
5. Detach the head cable connector (5) from the carriage frame (6).
6. Slide the carriage to the left side frame. While lifting the front end of the printer
mechanism, remove the head cable assembly (7) by pulling downward.
P/N 56624901 Cable: Head Assembly
Maintenance
RSPL
3 - 46 Pacemark 3410 Service Handbook
B.2.05