Line Feed Motor Assembly - OKIDATA Pacemark 3410 Service Handbook

3.2.18

Line Feed Motor Assembly

1. Remove the printer mechanism (3.2.07)
2. Remove the three mounting bolts and washers (1), then remove the line feed
motor(2).
NOTES:
When installing the line feed motor, the cable should be positioned toward the top.
Adjust the line feed belt tension (3.3.02) after installing the line feed motor.
This line feed motor is used in two different places: the bottom push unit and the printer
unit.
P/N 56509401 Motor: Line Feed (BTF)
Maintenance
RSPL
3 - 40 Pacemark 3410 Service Handbook
B.2.06