Limited Operation - OKIDATA Pacemark 3410 Service Handbook

Limited Operation

In the Printer Menu, the fifth item in the Set-Up Group is Operator Panel Function.
The settings for this Item are Full Operation and Limited Operation. The factory default is Full
Operation.
A system manager may use this feature to maintain proper print settings if the printer is part of a
customized system or if the printer is used by different operators.
When the Printer Menu is set to Limited Operation, the TOP OF FORM, MICRO FEED
UP/DOWN, PRINT QUALITY, and PITCH switches of the operator panel DO NOT work.
Menu Mode CANNOT be accessed.
To change from LIMITED OPERATION to FULL OPERATION, follow this procedure.
1. Verify that continuous feed paper is installed.
2. Verify that the ribbon is correctly installed.
3. Verify that the width of the installed paper matches the paper width menu setting.
4. Power OFF the printer.
5. Press and hold PRINT QUALITY and CHARACTER PITCH while powering ON
the printer to place the printer in Menu Mode.
When in Menu Mode, the functions printed below the operator panels switches are active.
6. Press GROUP until Set-Up prints.
7. Press ITEM until Operator Panel Function prints.
8. Press SET until FULL OPERATION prints.
9. Press EXIT to exit Menu Mode.
Pacemark 3410 Service Handbook 3 - 85 Maintenance