OKIDATA Pacemark 3410 Service Handbook page 176

Factory default settings are printed in Bold Italic.
Except as indicated, the menu for the Epson/IBM model is the same as the menu for the
ML/Pacemark model.
Group
Set-Up
Max. Receive Buffer
Paper Out Override
Print Registration
Maintenance
Item
Bi-directional , Unidirectional
Graphics
3 - 90
Setting
1 Line, 4K, 16K , 28K
No , Yes
0.25 mm Right,
0.20 mm Right,
0.15 mm Right,
0.10 mm Right,
0.05 mm Right,
0.00 mm,
0.05 mm Left,
0.10 mm Left,
0.15 mm Left,
0.20 mm Left,
0.25 mm Left
Pacemark 3410 Service Handbook
Notes
Bi-directional prints from left to
right, then right to left. It is
faster, but may cause
registration problems.
Unidirectional prints from left
to right ONLY. It is more
precise, but slower.
Specifies the amount of the
printer's buffer used to store
data.
A sensor stops printing about
1 inch from the bottom of a
single page. Changing this
setting to YES allows printing
to occur closer to the bottom
edge of the paper.
Adjusts the vertical
registration in graphics. The
best setting may vary from
one software package to
another.