OKIDATA Pacemark 3410 Service Handbook page 173

Factory default settings are printed in Bold Italic.
Except as indicated, the menu for the Epson/IBM model is the same as the menu for the
ML/Pacemark model.
Group
The next three groups set parameters for each of the paper paths independently.
When changing from one path to another, the parameters also automatically change.
Rear Feed
Pacemark 3410 Service Handbook
Item
Line Spacing
Form Tear Off OFF , 500 mS, 1 sec, 2 sec
Skip Over Perforation
Page Width
Page Length
3 - 87
Setting
6 , 8 LPI
No , Yes
13.6" , 8"
11 ", 11 2/3", 12", 14", 17",
3", 3.5" 4", 5.5", 6", 7", 8",
8.5"
Notes
Sets the distance between
line in lines per inch.
Activate the form tear off
feature by selecting a time
for the printer to wait after
data before advancing the
page to tear-off.
If the software pauses
during printing, print
registration may be
disrupted. Select a longer
time or deactivate this
feature.
Refer to the Printer
Handbook.
When set to YES, the
printer advances the paper
1 inch (when reaching the
bottom of the page) to the
next top of form.
Use ONLY for unformatted
listings or programs that
don't format the page.
The 8" setting emulates a
narrow carriage printer.
If 8.5" paper is always
used, choose this setting
to prevent printing on the
platen.
Maintenance