Page: 38
Service Guide PM3410
Chapter 3 Maintenance & Disassembly
3.2.04 Operator Panel
Remove the upper cover assembly (3.2.03)
1.
2. Disconnect the operator panel cable (1) from CN10 (2) on the control board.
3. Remove the two mounting screws (3).
4. Detach the operator panel assembly by moving it upward, and then pulling toward the front of the
printer, detaching the four claws.
5. Release the ten claws.
6. Detach the operator panel (4) from the operator panel holder (5).
P/N 53553401 Panel: Operator (PM3410) RSPL B.2.04
P/N 55061401 PCB: OPML Operation Panel RSPL B.2.04
P/N 56628402 Cable: Op Panel (PM3410) RSPL B.2.04