2.2.06
Automatic Paper Loading
Automatic Paper Loading is used to consistently set the print start position when using cut-sheet
or continuous sheet paper. The autoloading procedures for each type of paper follow.
Cut-Sheet Paper
1. Push the paper release lever to the cut-sheet position.
2. Insert the paper from behind the platen.
3. Press the FORM FEED switch.
4. The paper bail will automatically open.
5. The line feed operation will load the paper.
6. The paper bail will automatically close.
NOTE:
If the paper does not move, the Auto-Load motion becomes invalid and is treated like an
ordinary paper-end condition.
Continuous Sheet (Rear Feed) SASF
1. Push the paper release lever to the continuous sheet side (front of printer).
2. Insert the paper into the push tractor. The white guide line on the left tractor MUST
be visible.
3. Press the FORM FEED switch.
4. The paper bail will automatically open.
5. The line feed operation will load the paper.
6. The paper bail will automatically close.
NOTE:
If the paper does not move, the auto-load motion becomes invalid and is treated like an
ordinary paper-end condition.
Principles of Operation
2 - 18
Pacemark 3410