Power Supply Unit - OKIDATA Pacemark 3410 Service Handbook

3.2.08

Power Supply Unit

1. Remove the printer mechanism (3.2.07).
2. Disconnect the two cables (1) from the left side of the power supply unit (2).
3. Remove the four power supply mounting screws (3).
4. To remove the power supply unit:
Rotate the left side of the power supply unit towards the front of the printer.
Lift the power supply unit to disengage the power switch (4), AC receptacle (5)
and the tabs (6).
CAUTION:
Be careful not to damage the cables with the power supply unit mounting bracket (7).
This bracket is located at the left/rear of the power supply unit.
P/N 56406302 Power Supply Assembly (220/240 V)
P/N 56411201 Power Supply Assembly (120 V)
Maintenance
Option
RSPL
3 - 20 Pacemark 3410 Service Handbook
B.2.03
B.2.03