3.1
OVERVIEW
3.1.01
General Information
This section lists the parts replacement, adjustment, cleaning, lubrication, and shipping
procedures.
Disassembly should not be performed unless absolutely necessary. NEVER perform
disassembly on a malfunctioning unit until you have followed the failure analysis procedures in
Section Four of this Service Handbook.
Follow the procedures listed in Adjustments and Service Settings. Adjustments may be required
when either consumables or parts are replaced. Failure to perform these procedures could result
in unnecessary service calls.
Cleaning procedures must be performed correctly if high print quality is to be achieved.
Pacemark 3410 Service Handbook
3 - 1
Maintenance