Procedure - OKIDATA Pacemark 3410 Service Handbook

Procedure

To perform the Rolling ASCII Test, follow this procedure.
1. Verify that continuous feed paper is installed.
2. Verify that the ribbon is correctly installed.
3. Verify that the width of the installed paper matches the paper width menu setting.
4. Power OFF the printer.
5. Press FORM FEED as you power ON the printer.
6. The Test will run until one of the following situations occur.
A. The technician presses SELECT.
B. A Paper End condition is encountered.
Failure Analysis 4 - 40 Pacemark 3410 Service Handbook