Printhead (With Preliminary Items) - OKIDATA Pacemark 3410 Service Handbook

3.2.01

Printhead (with Preliminary Items)

WARNING:
The printhead will be HOT immediately after printing.
1. Open the printer access cover (1).
2. Remove the ribbon cartridge (2).
3. Set the head gap adjusting lever (3) to the range '9' position.
4. Lift and remove the ribbon guide (4) from the two posts.
5. Remove the two printhead mounting screws (5).
6. Disconnect the printhead (6) from the connector by lifting.
NOTES:
Installation
Push the printhead towards the platen (in the direction of Arrow A).
Perform the printhead gap adjustment. Refer to Section 3.3
P/N 50215701 Cover: Access
P/N 50090301 Printhead: Assembly
P/N 52105801 Ribbon Cartridge
P/N 56609701 Cord: AC (120V)
P/N 56624101 Cord: AC (220V) (ML) Right Angle
P/N 53062601 Guide: Ribbon Assembly
Maintenance
RSPL
RSPL
Consumable
RSPL
Option
RSPL
3 - 6 Pacemark 3410 Service Handbook
B.2.02
B.2.03
B.2.03, B.2.12
B.2.03
B.2.03
B.2.05