OKIDATA Pacemark 3410 Service Handbook page 174

Factory default settings are printed in Bold Italic.
Except as indicated, the menu for the Epson/IBM model is the same as the menu for the
ML/Pacemark model.
Group
Bottom Feed
Maintenance
Item
Line Spacing
Form Tear Off OFF , 500 mS, 1 sec, 2 sec
Skip Over Perforation
Page Width
Page Length
3 - 88
Setting
6 , 8 LPI
No , Yes
13.6" , 8"
11 ", 11 2/3", 12", 14", 17",
3", 3.5" 4", 5.5", 6", 7", 8",
8.5"
Pacemark 3410 Service Handbook
Notes
Sets the distance between
line in lines per inch.
Activate the form tear off
feature by selecting a time
for the printer to wait after
data before advancing the
page to tear-off.
If the software pauses
during printing, print
registration may be
disrupted. Select a longer
time or deactivate this
feature.
Refer to the Printer
Handbook.
When set to YES, the
printer advances the paper
1 inch (when reaching the
bottom of the page) to the
next top of form.
Use ONLY for unformatted
listings or programs that
don't format the page.
The 8" setting emulates a
narrow carriage printer.
If 8.5" paper is always
used, choose this setting
to prevent printing on the
platen.