3.2.05
Interface Connector Board
NOTE:
To allow easier access to the mounting screw and cables, configure the interface
connector board to use the serial interface connector.
1. Remove the upper cover assembly (3.2.03).
2. Disconnect connectors CN101 (1), CN102 (2), and CN103 (3).
3. Remove the two mounting screws (4) and detach the interface connector board (5) by
lifting.
NOTE:
After assembly, configure the interface connector board for the desired type of interface.
P/N 55061711
PCB: HKTY Interface Connector Assembly
Maintenance
3 - 14
Pacemark 3410 Service Handbook
RSPL
B.2.03