Read Me First
The Read Me First Sheet in the Pacemark 3410 Replacement Printhead Kit reads as follows.
When changing paper paths or paper type, be sure to adjust the printhead gap lever. This
blue lever is located on the right hand side of the printer. Failure to correctly adjust this
lever could result in damage to the printhead.
Head Gap
1 through 9
3-3-01d.pcx
Maintenance
Serrated Tab
Blue Lever
Head Gap
Set Point
Indicator Lever
Insure that the lever
corresponds to the
proper gap setting.
This example shows
setting 5.
3 - 76
Paper
12 - 14 lb. paper
Labels
Envelopes
Forms (w/carbon)
Two-part
Three-part
Four-part
Five-part
Six-part
Pacemark 3410 Service Handbook
Setting
1
3 - 4
5 - 9
2 - 3
3 - 4
5
6
7