OKIDATA Pacemark 3410 Service Handbook page 37

11. PAPER END (when the release lever is in the continuous [tractor] feed position) is
detected by the photosensor located on the paper pressure guide.
A. True
B. False
Correct Answer: B
Page 2-8, Section Two, Service Handbook, Rev 01
Pages 2-10 and 2-17, Service Handbook, Rev 02
12. A customer states that the printer occasionally switches from bi-directional to
uni-directional printing while printing a particular job. The printer then stops
printing for a while. Printing resumes without warning. What is the most probable
cause?
A. The main logic board is defective.
B. The printhead is overheating.
C. The ribbon is incorrectly installed.
D. The printer is out of paper.
Correct Answer: B
Page 2-8, Service Handbook, Rev 01
Page 1-8, 2-10, and 4-11, Service Handbook, Rev 02
Pacemark 3410 Service Handbook i - 21 Course Administration