Sensor (Booklet Maker Paddle Home) Removal - Lexmark MS911 Service Manual

5
Remove the two screws (C), and then remove the motor.
Installation note: Rotate the bracket counterclockwise to tighten the belt before installing all the screws.

Sensor (booklet maker paddle home) removal

1
Remove the front cover. See
2
Remove the paddle belt. See
3
Remove the clip (A), and then remove the encoder.
"Booklet maker front cover removal" on page
"Booklet maker paddle belt removal" on page
Repair information
477
456.
474.
4021, 7421