Staple Finisher Elevator Gears Removal - Lexmark MS911 Service Manual

9
Remove the clip (C), remove the front belt cover, and then remove the belt.
10
Remove the screw (D), and then remove the belt from the bracket.
Installation note: To ensure that the front and rear brackets are level, place them at their lowest position before
installing the belts on the gears.

Staple finisher elevator gears removal

1
Remove the bin. See
2
Remove the rear cover. See
3
Remove the front cover. See
"Staple finisher bin removal" on page
"Staple finisher rear cover removal" on page
"Staple finisher front cover removal" on page
Repair information
232.
230.
229.
274
4021, 7421