Mfp Stapler Assembly Sensor (Paddle Hp) Removal - Lexmark MB790MFP Service Manual

MFP stapler assembly sensor (media stack) removal
1. Remove the top cover. See
2. Disconnect the harness to the sensor (media stack).
3. Using your fingers, pinch tab (A) securing the sensor (media stack) and remove.

MFP stapler assembly sensor (paddle HP) removal

1. Remove the left cover. See
2. Disconnect the harness to the sensor (paddle home position).
"MFP stapler assembly top cover removal" on page
A
"MFP stapler assembly left cover removal" on page
7462
4-204.
4-204.
4-215
Repair information
Previous
Next
Go Back