Lexmark MS911 Service Manual page 528

3
Remove the top frame brace. See
4
Remove the middle frame brace. See
5
Remove the bifold knife primary drive gears bracket. See
516.
6
Remove the bifold knife and tamper assembly. See
7
Remove the front and rear tamper plates.
8
Remove the four screws (A).
9
Release the two latches (B), and then separate the tamper tray.
10
Remove the two tamper racks (C).
11
Remove the sensor (booklet maker tamper paper present) (D).
"Top frame brace removal" on page
"Middle frame brace removal" on page
"Bifold knife primary drive gears removal" on page
"Bifold knife and tamper assembly removal" on page
B
A
Repair information
528
463.
464.
4021, 7421
517.