Shpf Stapling Operation For Multiple Staple Jobs - Lexmark MS911 Service Manual

SHPF stapling operation for multiple staple jobs

To enable the finisher to handle multiple staple jobs, the first two sheets of each paper stack are simultaneously fed
to the compiler assembly. The following example demonstrates two staple jobs.
After the last sheet of the first stack is fed to the compiler assembly, the first sheet of the second stack is fed between
the compiler feed roller and idler rollers.
While the first stack is being aligned, the compiler feed roller rotates in reverse and then feeds the paper to the pre-
feed guide.
# Part
1 Compiler feed idler rollers
2 Compiler feed roller
Appendix C: Theory of operation
661
4021, 7421