Sensor (Shpf Top Bin Full, Receive) Removal - Lexmark MS911 Service Manual

5
Remove the screw (B), and then remove the sensor bracket.
6
Disconnect the cable, and then remove the sensor from the bracket.

Sensor (SHPF top bin full, receive) removal

1
Remove the front door. See
2
Remove the top inner cover. See
3
Remove the rear cover. See
4
Remove the paddle motor bracket. See
"SHPF front door removal" on page
"SHPF top inner cover removal" on page
"SHPF rear cover removal" on page
"SHPF paddle motor bracket removal" on page
Repair information
387
336.
336.
339.
383.
4021, 7421