USB Speed
This setting determines the throughput of the USB port on the printer.
1
Enter the Configuration Menu, and then select USB Speed.
2
Select a setting.
3
Apply the changes.
Automatically Display Error Screens
This setting allows the automatic display of existing printer-related messages on the home screen after the printer
remains inactive.
1
Enter the Configuration Menu, and then select Automatically Display Error Screens.
2
Select a setting.
3
Apply the changes.
Restore factory defaults
Restore Settings
This setting restores the printer to its network or base settings
1
Enter the Configuration Menu, and then navigate to:
Restore Factory Defaults > Restore Settings
2
Select a setting.
3
Apply the changes.
Erase Printer Memory
This setting makes any sensitive information on the volatile or non-volatile storage of the printer completely
indecipherable.
Enter the Configuration Menu, and then navigate to Restore Factory Defaults > Erase Printer Memory.
Erase Hard Disk
This setting performs a disk wipe operation and erases all data.
Note: Do not reset the printer while a disk wipe operation is going on to avoid corrupting the disk.
Service menus
210
4021, 7421