Lexmark MS911 Service Manual page 52

•
When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto setting reprints
jammed pages only if adequate printer memory is available.
Area name
1 Automatic document feeder (ADF)
2 Door C
3 Door D
4 Door F
5 Trays
6 Door H
7 Finisher bins
8 Door J
9 Area G
Area name
ADF
Multipurpose feeder
Door C, trays
Door D, trays
Control panel message
[x]-page jam, press latch at area E to open
ADF's top cover. [28y.xx]
[x]‑page jam, clear jammed paper from the
multipurpose feeder. [200.xx]
[x]‑page jam, open door C and clear all
jammed paper. [2yy.xx]
[x]‑page jam, slide the 3000‑sheet tray and
open door C. [2yy.xx]
[x]‑page jam, open door D and clear all
jammed paper. [24y.xx]
[x]‑page jam, slide the 3000‑sheet tray and
open door D. [24y.xx]
Diagnostic information
52
What to do
Open the ADF top door, and then remove
the jammed paper.
Remove the jammed paper from the
feeder.
Open door C, and then remove the jammed
paper.
Pull out the tray, and then remove the
jammed paper.
Open door D, and then remove the jammed
paper.
Pull out the tray, and then remove the
jammed paper.
4021, 7421