Lexmark MS911 Service Manual page 685

Load Multipurpose Feeder with [custom type name]
[paper orientation] 41
Load Multipurpose Feeder with [paper size] [paper
orientation] 41
Load Multipurpose Feeder with [paper type] [paper
size] [paper orientation] 42
Load staples 42
Load staples [G11, G12] 42
Memory full [38] 42
Memory full, cannot print faxes 43
Memory full, cannot send faxes 43
Network [x] software error [54] 43
No analog phone line connected to modem, fax is
disabled. 43
Not enough free space in flash memory for resources
[52] 43
Open door H and remove paper from beneath area
H10 43
Paper changes needed 43
Parallel port [x] disabled [56] 44
Photoconductor low [84.xy] 44
Photoconductor very low [84.xy] 44
Printer had to restart. Last job may be incomplete. 44
Reinstall missing or unresponsive cartridge [31.xy] 44
Reinstall missing or unresponsive photoconductor
[31.xy] 44
Remove defective disk [61] 44
Remove packaging material, [area name] 45
Remove packaging material, open door C, remove
metal clips, remove all screws from scanner
carriage 45
Remove paper from [linked set bin name] 45
Remove paper from all bins 45
Remove paper from bin [x] 45
Remove paper from standard output bin 45
Replace [x] maintenance kit, 0 estimated pages
remain [80.xy] 46
Replace all originals if restarting job. 45
Replace cartridge, 0 estimated pages remain
[88.xy] 45
Replace cartridge, printer region mismatch [42.xy] 46
Replace jammed originals if restarting job. 46
Replace missing cartridge [31.xy] 47
Replace missing photoconductor [31.xy] 46
Replace missing waste toner bottle [82.xy] 47
Replace paper pick rollers in [paper source], use parts
and instructions in tray 1 or tray 2 compartment
[80] 47
Replace photoconductor, 0 pages remain [84.xy] 47
Replace unsupported cartridge [32.xy] 47
Replace unsupported photoconductor [32.xy] 47
Replace waste toner bottle [82.xy] 47
Restore held jobs? 47
Scanner disabled by admin [840.01] 48
Scanner disabled. Contact system administrator if
problem persists. [840.02] 48
Scanner jam, remove jammed originals from the
scanner [2yy.xx] 48
Scanner maintenance required soon, use ADF Kit
[80] 48
Scanner maintenance required, use ADF Kit [80] 48
Serial port [x] disabled [56] 48
SMTP server not set up. Contact system
administrator. 48
Some held jobs were not restored 48
Standard network software error [54] 49
Standard USB port disabled [56] 49
Supply needed to complete job 49
The device is operating in safe mode. Some print
options may be disabled or provide unexpected
results. 49
Too many flash options installed [58] 49
Too many trays attached [58] 49
Tray [x] paper size unsupported 50
Unformatted flash detected [53] 50
Unsupported disk 50
Unsupported option in slot [x] [55] 50
Unsupported USB hub, please remove 38
Waste toner bottle nearly full [82.xy] 50
Weblink server not set up. Contact system
administrator. 50
printer setup
defaults 198
edge to edge 199
enable edge to edge copy 199
parallel strobe adjustment 199
permanent page count 198
printed page count 198
processor ID 198
reset engine service error 199
reset fuser counter 200
restore backup data 199
R
recovery mode
accessing 211
registration 189
Reinstall missing or unresponsive cartridge [31.xy] 44
Reinstall missing or unresponsive photoconductor
[31.xy] 44
removal
bifold exit jam access door 459
bifold guide drive gears 525
bifold guide idler gears 530
Index
685
4021, 7421