Lexmark MS911 Service Manual page 655

SHPF compiler section paper feed
The manner in which paper is fed to the compiler assembly depends on the paper type.
• Non-plain paper—All sheets are individually fed to the compiler assembly.
•
Plain paper—The first two sheets of the stack are simultaneously fed to the compiler assembly. The succeeding
sheets are individually fed.
The following sequence explains the process of feeding and aligning plain paper in the compiler assembly.
The first sheet is fed between the compiler feed roller and idler rollers.
# Part
1 Exit roller cam
2 Exit idler assembly
3 Compiler feed roller
4 Sensor (SHPF compiler feed roller release)
5 Motor (SHPF compiler feed roller release)
6 Compiler feed roller release cam encoder
Appendix C: Theory of operation
655
4021, 7421