4
Remove the four screws (A), and then remove the bracket.
5
Remove the two clips (B), and then remove the gears.
Bifold knife and tamper assembly removal
Note: This part is not a FRU.
1
Remove the front cover. See
2
Remove the right cover. See
3
Remove the top frame brace. See
4
Remove the middle frame brace. See
"Booklet maker front cover removal" on page
"Booklet maker right cover removal" on page
"Top frame brace removal" on page
"Middle frame brace removal" on page
Repair information
517
456.
457.
463.
464.
4021, 7421