Staple Finisher Interface Board Removal - Lexmark MS911 Service Manual

4
Disconnect the cable (B), and then remove the assembly.

Staple finisher interface board removal

1
Remove the front cover. See
2
Remove the staple unit. See
3
Remove the staple unit carriage assembly. See
261.
4
Disconnect all cables from the board.
5
Release the two latches (A), and then remove the board.
"Staple finisher front cover removal" on page
"Staple finisher staple unit removal" on page
"Staple finisher staple unit carriage assembly removal" on page
Repair information
262
229.
260.
4021, 7421