Lexmark MS911 Service Manual page 273

4
Remove the rear guide rail. See
5
Remove the motor (staple finisher elevator). See
6
Remove the elevator drive gears bracket. See
7
Remove the clip (A), remove the rear belt cover, and then remove the belt.
8
Remove the screw (B), and then remove the belt from the bracket.
"Staple finisher guide rails removal" on page
"Motor (staple finisher elevator) removal" on page
"Staple finisher elevator drive gears removal" on page
Repair information
273
4021, 7421
243.
250.
271.