Erasing An Empty F-Code Box; F-Code Transmission - Muratec F-320 Operating Instructions Manual

Erasing an empty F-Code box

An F-Code box must be empty in order to erase it. (If you select an F-Code box in
these steps which is not empty, the machine beeps. If this happens, print all docu-
ments in that box before erasing it.)
To erase an empty F-Code box:
1
Press , 3, 5, 2, . The
MENU ENTER
Select F-Code Box
01:No Number Stored
2
Use the numeric keypad to enter the two-digit identifier number (01-50) of
the F-Code box you want to erase.
3
Press . If the F-Code box is empty, the
ENTER
03:Erase F-Code Box
Enter I.D. Code:****
Important: If you select an F-Code box which is not empty, the machine
beeps and, before returning to step 2, briefly displays:
Select F-Code Box
Box In Use
Print any documents received in the F-Code box, then repeat
this procedure from the beginning to erase the box.
Otherwise, select another F-Code box.
4
Use the numeric keypad to enter the four-digit
5
Press .
ENTER
If you've entered an incorrect
and returns to standby mode.
If you've entered the correct .
I
alternately:
03:Erase F-Code Box
Yes Enter
Note: If you want to quit without erasing the F-Code box you've selected,
press . The fax will return to step 2.
CANCEL
Note: If you want to quit without erasing any F-Code box, press
The machine returns to standby mode.
shows:
LCD
shows:
LCD
. . code.
I D
. . code, your fax machine rejects the attempt
I D
. code, the following two displays will appear
D
03:Erase F-Code Box
No Cancel
6
Press
ENTER
To erase another F-Code box, repeat steps 2-6.
To finish, press
F-Code transmission and polling
With F-Code, your machine can send secure transmissions, perform relay broadcast
initiations and even poll from other
facturer.
You can do this two ways:
• Using the programmable one-touch key (see pages 3.36–3.38)
• Entering the
describe here.
Note: For F-Code communication to work, three things must be true:
• The remote fax machine must support
• The remote fax must have a mailbox with an
on it
• You must know the
remote machine's mailbox

F-Code transmission

1
Insert the document.
2
Adjust the document mode and contrast if necessary.
3
If you want to toggle between real time transmission and memory transmis-
sion, press
4
Press
COMM
Enter Sub-Address
_
5
Use the numeric keypad to enter the appropriate sub-address in the remote
machine.
Note: If you make a mistake, press
enter the correct number.
6
Press
ENTER
.
STOP
Enter Password
_
Note: If this sub-address does not have a password, skip to step 8.
to erase the F-Code box.
.
STOP
- -equipped machines, regardless of manu-
ITU T
- sub-address and password directly, which is what we'll
ITU T
ITU
- sub-address and password (if any) for the
ITU T
.
MEMORY TRANSMIT
. three times and then press
OPTIONS
to erase the character, then
CANCEL
. The shows:
LCD
Advanced features
- sub-addressing
T
- sub-address created
ITU T
.
ENTER
3.31