Operating Tips; Symbol And Terms; How To Operate The Machine - Muratec F-320 Operating Instructions Manual

Getting started

Operating tips

Symbol and terms

In this manual, the following symbols and terms are used, make sure you know
what they mean.
CAUTION This symbol indicates how to avoid personal injury.
Important: This instruction describes conditions or incorrect operations that
could cause damage to your machine.
Note: A note describes helpful hints, restrictions, or how to avoid diffi-
culties.
" " Items that appear on the
Keys built into the machine's control panel.
BOLD WORDS
The Liquid Crystal Display. It shows the machine's status, error
LCD
messages and function menu, etc.
Document "Document" is the original sheet(s) of paper you send or copy on
your machine.
Paper "Paper" is the recording paper for printing.
, Shows the direction of the document or paper.
Any function can be started by first pressing the
MENU
Cursor key Press , ,
1.10
.
LCD
MENU
or to select items in a menu or move the cursor.

How to operate the machine

Most settings and functions are started by first pressing the
three- or four-digit numbers to select the function. In this manual, we explain the
operation with short-cut operations (for example, we will say, "press
To press: 0 (zero), 1, 2, 3, 4, 5, 6, 7, 8, 9, # or *
Use: The numeric keypad.
Here's an example. If we say "press
Note: Even though our example above includes commas, do not enter them into
the fax machine. Those characters appear in our instructions to separate
one number from the other. They do not need to be entered into your fax
machine.
There is a function (broadcasting) which requires commas to be entered, but
key.
there is a special way to enter them. We'll explain this process later.
, 2, 1, 0, 1, " ...
MENU ENTER
... you'd press key
MENU
... then 2
... then 1
... then 0 (the numeric key zero)
... then 1
... and then
ENTER
key. Then press
MENU
, 2, 1, 0, 1.").
MENU